Taizhou JinQuan Copper Co., Ltd.
Taizhou JinQuan Copper Co., Ltd. Guided by Market and Existing by Quality
Add to Cart
Anti Torsion Length 30cm 40cm Flexible Brass Hose
Flexible Brass Hose Technical requirements:
1.According to GB/T14525/2010
2.Remove the impurities and splash and guarantee weld appearance
3.Dense waves on both ends of the hose
4.Working pressure 25 bar,working temperature -20~130 degrees Celsius
5.Firstly Spray one layer of anti-rust primer on the surface of the carbon steel,
Then spray on imitation plating silver metallic paint,do not spray on sealing
Surface,but wipe with anti-rust oil
6.Note:Down groove butt on welding ring position
Stainless Steel Braided hose is a kind of flexible hose with high quality in modern industrial pipeline.The inner tube of metal bellows hose is spiral or annular thin-wall stainless steel bellows, the outer braid mesh of bellow pipe(corrugated pipe) is made of stainless steel wire and steel belt according to certain parameters,the joints or flanges on both ends of the hose are matched to the joint or flange of the customer's pipe.
Flexible Brass Hose Standard
Comply with ASSE 1061-2011
IAPMO approved material, and comply with AB1953 Pb<0.20
100% tested by High water pressure and Low water pressure
100% dimenions checked on Grab Ring and body
Tension test:EN1254-6
Push & pull times test
Dezincification resistance
Stress corrosion resistance
Flexible Brass Hose Parameters
| Detail Specification | |
| Product Name | Anti Torsion Length 30cm 40cm Flexible Brass Hose |
| Material | 304 Stainless steel |
| Finishing | Brushed nickel finishing |
| Size | 30cm, 40cm, 50cm, 60cm, 80cm,100cm,120cm,150cm,200cm |
| Function | Cold/hot water faucet inlet hose |
| Working pressure | 10 Bar |
| Seal test | 1.6±0.05Mpa and 0.05±0.01Mpa, keep 1 min, no leakage |
| Flow rate | ≤8.3L/min |
| Plating | Acid salt spray test ≥ 24 or 48 hours |
| Plating thickness | Chrome ≥ 0.2µm, nickel ≥ 8µm Or per your request |
| Certification | ISO9001:2008, ISO14001, cUPC, NSF, AB1953. Watersense |
| Warranty time | 5 years |
| Customized | OEM & ODM are welcomed |
| Package | One piece one box |
| Package & Shipping | |
| Samples leading time | 3-5 days |
| Bulk leading time | About 15 days |
| Inner box | 200*160*145cm |
| Carton Size | 510*420*300 cm |
FAQ
Q. Are you a factory or a trading company?
A: We are direct factory, our production line includes all brass, stainless steel copper and aluminum products or according to your requirements
Q. How long do I need to get the product sample for inspection?
A: For samples in stock, we can send them to you immediately. If it need make new samples according to your specifications, it will take about 15 working days
Q. What is the time of delivery?
A: If the items is in stock, we can deliver within 7 days after receiving your payment For customized orders, within 20tons, production time is 40-45 days after confirmation of each detail
Q. How to control the guarantee of product quality?
A: We have an independent laboratory, whose operating standard is EN13828
We carry out comprehensive quality inspection from raw materials to every link Meanwhile, our company has PICC insurance and we have a 3-year quality guarantee. At the same time our company has a lot of certification, such as Iso9001
TS, CUPC, NSF, AB1953, CSA, CE and ACs, etc